shooter CAD
2 posters
Page 1 of 1
shooter CAD
Adnaan Peshimam Wed Mar 20, 2013 7:48 am
basic structure of the shooter according to the shooter teams design
what i have so far weighs just above 8.5 lbs, but thats without the wheels and ram that pushes frisbess forward
including material for mounting motors and wheels, as well as structural additions for mounting to robot, it should
come up to ~15 lbs, give or take 1 or 2 lbs
what i have so far weighs just above 8.5 lbs, but thats without the wheels and ram that pushes frisbess forward
including material for mounting motors and wheels, as well as structural additions for mounting to robot, it should
come up to ~15 lbs, give or take 1 or 2 lbs
Adnaan Peshimam- Posts : 81
Join date : 2011-10-12
Age : 27
Re: shooter CAD
Adnaan Peshimam Wed Mar 20, 2013 6:43 pm
*update*
added a housing and mounting bracket for the shooter wheels
makes the overall width of the shooter 14.5", and the weight is now 9.8lbs
added a housing and mounting bracket for the shooter wheels
makes the overall width of the shooter 14.5", and the weight is now 9.8lbs
Adnaan Peshimam- Posts : 81
Join date : 2011-10-12
Age : 27
Re: shooter CAD
Sam Hassall Wed Mar 20, 2013 9:05 pm
awesome. Let's get the required materials and put this together.
Sam Hassall- Posts : 134
Join date : 2012-09-25
Re: shooter CAD
Adnaan Peshimam Thu Mar 21, 2013 8:13 am
in terms of raw material, the design as last posted calls for:
25.5" of 1.5" c-channel
24" of 1" angle iron
9.5" of 1" flat stock
11" x 24.75" of lexan
As for the holding bucket, a lot of team used buckets of this type
*EDIT* also need 14.75" of 2" flat stock
25.5" of 1.5" c-channel
24" of 1" angle iron
9.5" of 1" flat stock
11" x 24.75" of lexan
As for the holding bucket, a lot of team used buckets of this type
*EDIT* also need 14.75" of 2" flat stock
Adnaan Peshimam- Posts : 81
Join date : 2011-10-12
Age : 27
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum|
|
|